Programming Procedure #501
IMPORTANT: Have all the remotes you want to program for the system on hand (including any existing remotes) prior to beginning the procedure. Find the alarm control module under the driver side dash (often behind the kick panel on the left) which is brown or manila colored.)
- Sit inside the vehicle with the hood, trunk and all the doors and windows closed.
- Place the alarm console switch in ALARM OFF position.
- Cycle the ignition key to “ON” (as far as you can go without cranking the engine) then back to “OFF” six times within 10 seconds, ending in the “OFF” position.
- Move the alarm console switch from the ALARM OFF to the AUTO and back to the ALARM OFF position.
- Press the LOCK/UNLOCK button on the remote ONE time.
- To program additional remotes (AND reprogram any existing remotes), repeat steps 4 and 5 for each additional remote.
- To exit programming, open any door. Test transmitters for function.