Locate the keyless entry control module just above the fuse panel underneath the driver’s side dash. Locate the black and white wires coming out of the control module. The black and white wires are typically found disconnected. In some cases the black and white wires lead to a valet switch.
Turn the ignition on and touch the black wire to the white wire 13 times (or flick the valet switch, if installed, 13 times.)
Press button 1 on the remote.
Turn off the ignition. Press button 1 on the remote. If the doors automatically lock then unlock continue to the next step, if not, repeat steps 2 and 3.
Turn on the ignition and touch the black wire to the white wire 14 times (or flick the valet switch, if installed, 14 times.)
Press button 2 on the remote.
Turn the ignition off. Press button 1. The driver door should unlock (if locked, press button 1 again to unlock.) Then press button 2. All the doors should unlock. If not, repeat steps 5 and 6.
Remove the programming switch and leave the white and black wires disconnected.
Fast shipping
Same day handling! Choose from multiple USPS and UPS shipping methods.
Satisfaction Guaranteed
30 day no hassle returns and exchanges.
Top-notch Support
Our agents can walk you through programming and troubleshooting.
Security and Privacy
We use ssl security to protect your data. We won't ever sell your data.
