Programming Procedure #310

Note: When the first keyless entry remote is programmed, all existing remotes lose their programming. Therefore, if you have an original remote remaining you will need to program it along with the new remote(s).

  1. Turn the ignition from position 1 to position 3 four times in six seconds, ending in position 1. A chime will sound.
  2. Press and hold any button on the remote until a chime sounds. This indicates the remote has been learned.
  3. Within 10 seconds, repeat step 2 for each remote. A chime will sound after each remote has been learned.
  4. Turn the ignition to position 3 to end programming.