1. Open the driver’s door and cycle the power lock switch on the door lock – unlock two times.
  2. Insert the keys in the ignition and turn the ignition switch from OFF to RUN, five times within ten seconds, ending in RUN. If the vehicle has successfully entered the program mode, it will lock and then unlock all doors automatically.
  3. Press ANY button on a keyless entry remote transmitter and the doors will lock and then unlock to confirm that each keyless entry remote transmitter has been activated. NOTE: When the first keyless entry remote transmitter is programmed, all existing keyless entry remote transmitters are erased.
  4. Repeat the previous step for each transmitter that will operate the vehicle.
  5. If the door locks do not respond for any keyless entry remote transmitter, wait 10 seconds and press the button again.
  6. Remove key from ignition to exit programming mode.