1. Open the driver’s door and cycle the power lock switch on the door lock – unlock two times.
  2. Insert the keys in the ignition and turn the ignition switch from OFF to RUN (as far as you can go without cranking the engine) eight times within 10 seconds, ending in RUN. IF the vehicle has successfully entered program mode, it will lock and then unlock all doors automatically. All previous transmitter codes will be erased when programming mode is entered.
  3. Within 5 seconds, press ANY button on a keyless entry remote transmitter. The doors will lock and then unlock to confirm that each keyless entry remote transmitter has been activated. Repeat this step for each transmitter that will operate the vehicle, pausing no more than 5 seconds between transmitters. Program mode is exited whenever timing constraints are not met.
  4. If the door locks do not respond for any keyless entry remote transmitter, wait several seconds and press the button again.
  5. Turn the ignition switch to the OFF position. If a keyless entry remote transmitter has been activated, the vehicle will lock and unlock all doors one last time to confirm.