Locate the programming connector behind the passenger side instrument panel (accessed by opening the glove box and looking to the top left side, where it is held in place by a clip). It is a plastic connector with two wires leading up to it. The connector is not plugged into anything. You will have to pull out the inner tray of the glove compartment to access the connector.
The programming connector has two terminals. Connect both terminals with a suitable jumper wire. The keyless entry module will cycle the door lock motors once. Make sure the jumper wire remains connected throughout the procedure.
Press the unlock button on the first remote. In response the keyless entry module will cycle the door lock motors again.
If a second remote is to be programmed (including your old one), press the unlock button on the second remote. Door locks cycle again.
Remove jumper wire.
Fast shipping
Same day handling! Choose from multiple USPS and UPS shipping methods.
Satisfaction Guaranteed
30 day no hassle returns and exchanges.
Top-notch Support
Our agents can walk you through programming and troubleshooting.
Security and Privacy
We use ssl security to protect your data. We won't ever sell your data.
