Programming Procedure #158
RELEARN REMOTE KEY
This display allows you to match Remote Keyless Entry (RKE) transmitters to your vehicle. To match an RKE transmitter to your vehicle:
- Press the vehicle information button until PRESS √ TO RELEARN REMOTE KEY displays.
- Press the set/reset button until REMOTE KEY LEARNING ACTIVE is displayed.
- Press and hold the lock and unlock buttons on the first transmitter at the same time for about 15 seconds. On vehicles with memory recall seats, the first transmitter learned will match driver 1 and the second will match driver 2. A chime will sound indicating that the transmitter is matched.
- To match additional transmitters at this timer repeat Step 3. Each vehicle can have a maximum of eight transmitters matched to it.
- To exit the programming mode, you must cycle the key to LOCK/OFF.
DIC Operation and Displays
The Driver Information Center (DIC) has different displays which can be accessed by pressing the DIC buttons located on the instrument panel, to the left of the steering wheel.

Trip/FueI: Press this button to scroll through the trip and fuel displays. See "Trip/Fuel Display Menu Items* following for more information on these displays.
Vehicle Information: Press this button to scroll through the vehicle information displays. See "Vehicle Information Display Menu Items" following for more information on these displays.
Customization: Press this button to scroll through each of the customization features. See DIC Vehicle Customization on page 3-62 for more information on the customization features.
Set/Reset: Press this button to reset certain DIC features and to acknowledge DIC warning messages and clear them from the DIC display.
Menu Up/Down: Press this button to scroll up and down the menu items.