Programming Procedure #156

Insert the ignition key and turn to the ON position (position just before you crank the vehicle) so you can access the (DIC).

Driver Information Center (DIC)

Use the following steps to program your keyless entry remote.
1. Press the vehicle information button until
PRESS √ TO RELEARN REMOTE KEY displays.
2. Press the set/reset button until REMOTE KEY LEARNING ACTIVE displays.
3. Press and hold the lock and unlock buttons on the first keyless
entry remote at the same time for approximately 15 seconds.
On vehicles with memory recall seats, the first transmitter learned will match driver 1 and the second will match driver 2.
A chime will sound indicating that the remote is programmed.
4. To program additional remotes at this time repeat step 3.
This vehicle can have a maximum of eight remotes programmed to it.
5. To exit the programming mode, turn the ignition key to OFF.
6. Test remote(s) for function.