Skip to content
- Insert the key in ignition and leave in the OFF position.
- Locate the Data Link Connector (DLC) under driver’s side dashboard. Use the figure below to find the A and G pins.
- Connect pins A and G of the DLC with a suitable electric wire. Receiver will respond by locking and unlocking doors within 2 seconds.
- Press the UNLOCK button on the first remote to be programmed. Vehicle will respond by locking and unlocking the doors.
- Press UNLOCK button on second remote to be programmed. Vehicle will respond by locking and unlocking the doors.
- Disconnect jumper wire between pins A and G.