Programming Procedure #103

To initiate, this procedure requires that a learned master key be available.

A total of 10 keys may be programmed to a single vehicle.

This procedure adds keys only. The procedure does not erase previously learned keys. An automotive locksmith is required for that.

Does not work on vehicles built for Canada – see an automotive locksmith.

1. With a previously learned master key, turn ON the ignition, with the engine OFF.
2. Turn OFF the ignition and remove the key.
3. Within 10 seconds of turning OFF the ignition, insert the key to be learned and turn ON the ignition. The vehicle has now learned the new key.