Pursuit PRO9242 Remote Programming
To add new keyfobs to your vehicle follow the directions below:
Note: To ensure that the system to be ready for programming, it shouldn't be in valet mode. The dash mounted LED illuminates solidly when in valet mode. Should you be in valet mode flip the switch to the other position before beginning.
1. Put your key in the ignition and switch it to the on position.
2. Flick the valet switch THREE times.
3. Press button #1 on the remote control you wish to add for Three seconds.
4. Flip the valet switch ONCE.
5. Push button #2 on the remote for Three seconds.
6. Take out key from ignition and then test the fob.